Origin and variability of resource-grade marine ferromanganese nodules and crusts in the Pacific Ocean: A review of biogeochemical and physical controls     

Philomène A. Verlaan  David S. Cronan 《Chemie der Erde / Geochemistry》2022,82(1):125741

Marine ferromanganese nodules and crusts containing Mn, Cu, Ni and Co in the most promising resource-grade concentrations and quantities, together with Fe and Zn (all elements of biogeochemical importance) are found far from land on the deep seafloor of the Pacific Ocean. The biogeochemical, chemical and physical mechanisms contributing to their formation, distribution, abundance and – for these six elements – variability in their concentrations in these deposits, are the main focus of the present review. The mechanisms addressed include biological productivity, sedimentation types and rates, bottom water characteristics, the Calcium Carbonate Compensation Depth, the depth and intensity of the oxygen minimum zone, and biogeochemical characteristics of the six focal elements. Particular attention is given to comparisons between the deposits found in the north and the south Pacific, in order to present an overarching view of our current understanding of the mechanisms that apply to both nodules and crusts in both oceanic hemispheres, including examination of the possible existence of a marine ferromanganese oxide continuum. The renewed interest in the commercial exploitation of these deposits has stimulated a welcome increase in scientific research that is essential to informing the public discourse on seabed mining. We briefly reflect on the work addressed in this review in that context.  相似文献   

Rodingites from the Veria-Naousa ophiolite (Greece): Mineralogical evolution,metasomatism and petrogenetic processes     

Aikaterini Rogkala  Petros Petrounias  Petros Koutsovitis  Panagiota P. Giannakopoulou  Panagiotis Pomonis  Paraskevi Lampropoulou  Konstantin Hatzipanagiotou 《Chemie der Erde / Geochemistry》2022,82(2):125860

In the Veria-Naousa ophiolitic complex (north Greece), rodingite appears mainly in the form of cross cutting dykes within serpentinised peridotites. It is distinguished into three types, based upon the provenance of its protoliths, textural characteristics, mineralogical assemblages and geochemical affinities. Type I rodigites were derived from boninitic diabasic protoliths and their mineralogical assemblage include garnet + clinopyroxene + chlorite. Type II rodingites were formed at the expense of gabbroic precursors, comprising clinopyroxene + garnet + vesuvianite ± quartz, whereas Type III rodingites replaced diabasic tholeiitic protoliths comprising of garnets + vesuvianite + clinopyroxene + chlorite. Rodingitisation resulted in desilification, decrease of alkalies, Al, Fe, Mg and increase in Ca contents. In Type I rodingites the MREE (middle rare earth elements) and HREE (heavy rare earth elements) were slightly reduced. Type II rodingites experienced LREE (light rare earth elements) depletions, whereas MREE and HREE remained fairly stable. Restricted mobility of REE in Type III rodingites is assigned to shallow-level rodingitisation under decreasing pH.Rodingitisation occured in two distinct stages at fore-arc settings. The first stage occured under mildly oxidising conditions and enhanced CO₂/H₂O ratios. This stage affected the protoliths of all rodingite types. The second rodingitisation stage occured under more oxidising conditions and lower CO₂/H₂O ratios, which corresponds to the exhumation stage of the serpentinite-rodingite formations. Types II and III rodingites were subjected to further rodingitisation under the increasing influence of slab-derived hydrous phases at shallower depths, leading to the formation of late-stage andradite and vesuvianite. All stages of rodingitisation are estimated to have occurred under relatively moderate temperatures and pressure (~300 to 450 °C; ~2–6 kbar respectively).  相似文献   

Temporal evolution of the focal mechanism consistency of the 2021 Yangbi MS 6.4 earthquake sequence in Yunnan     

Xiaobin Li  Mingpei Jin  Ya Huang  Wenjian Cha  Jun Wang  Sihai Li 《地震研究进展（英文）》2022,2(2):100061

Using the Cut And Paste (CAP) method, we invert the focal mechanism of 38 moderate earthquakes (M_S ≥ 3.0) recorded by Yunnan seismic network and analyze the corresponding focal mechanism consistency based on the minimum spatial rotation angle. Our results indicate that the M_S 6.4 mainshock is induced by a lateral strike slip fault (with a rake angle of ～ ?165°) and a little normal-faulting component event along a nearly vertical plane (dipping angle～ 79° and strike ～138°). Combining our results with high resolution catalog, we argue that the seismogenic fault of this earthquake sequence is a secondary fault western to the major Weixi-Qiaohou-Weishan fault. The focal mechanism evolution can be divided into three periods. During the first period, the foreshock sequence, the focal mechanism consistency is the highest (KA<36°); during the second period which is shortly after the mainshock, the focal mechanism shows strong variation with KA ranging from 8° to 110°; during the third period, the seismicity becomes weak and the focal mechanism of the earthquakes becomes more consistent than the second period (18°<KA<73°). We suggest that the KA, to some extent, represents the coherence between local tectonic stress regime and the stress state of each individual earthquake. Furthermore, high focal mechanism consistency and high linearity of seismic distribution may serve as indicators for the identification of foreshock sequence.  相似文献   

利用区域宽频地震数据反演2021年5月云南漾濞M_S6.4地震震源破裂过程     

朱音杰  罗艳  赵里  田建慧 《地球物理学报》2022,(3)

本文基于有限断层模型反演方法,利用区域宽频带数据反演了2021年5月云南漾濞M_S6.4地震的震源破裂过程,结果显示:此次地震的发震断层走向为SE向,主要以右旋走滑为主.破裂主要发生在震源东南侧,最大错动量约为0.55 m,位于深度约9 km处,发生明显破裂的深度约达13 km.此次地震释放的标量地震矩为1.48×10¹⁸N·m,相当于矩震级M_W6.05.地震能量主要在前11 s释放.在深度为6~8 km处破裂速度有明显的变快,可能加剧了地表的震动.  相似文献   

2022年门源M_S6.9地震震区三维速度与发震机制研究          下载免费PDF全文

尹欣欣  邱江涛  李敏娟  许康生  张波  张胜霞 《地震工程学报》2022,44(2):360-369

2022年1月8日,青海省门源县发生M_S6.9地震。使用青海、甘肃等区域数字台网所观测到的2009年1月1日—2022年2月8日间青海门源及周边地区(36°～39°N,101°～104°E)14 869次地震事件的地震观测资料,基于双差成像(TomoDD)方法进行重定位分析,结果表明：门源及周边地区地震震源深度较浅,主要集中在5～15 km深度范围,其中10 km附近分布最多。推断该深度区域为门源及周边地区的主要孕震区。基于地震重定位结果和主震区三维速度结构分别对2016年门源M_S6.4地震和此次地震序列的发震机理进行分析对比,发现两次地震都位于高速异常体边缘,速度结构与断裂、地震序列吻合较好。2022年门源地震位于高速体的西端末梢位置,是该高速体受青藏高原东北缘顺时针应力作用导致的滑动产生的走滑型地震。  相似文献   

胶东半岛乳山地区低角度韧性剪切带几何学、运动学特征:对中国东部岩石圈减薄作用的启示     

郝志宣  金超  田忠华  李同宇  文飞 《地质科学》2022,57(1):43-60

大规模伸展构造是华北克拉通东部岩石圈减薄的重要表现形式。部分低角度韧性剪切带是地壳伸展变形后所展现的构造形式。本文研究了王格庄韧性剪切带的岩石学、几何学、运动学等特征显示:韧性剪切带走向近南北向,剪切带断层面倾向多变(倾向西、西南、西北方向)。大部分区域面理低角度倾向西,矿物拉伸线理近东西向,不对称旋转碎斑及S-C组构指示顶端指向西的剪切特征。结合研究区西侧与伸展构造相匹配的半地堑伸展盆地证据:本研究认为伸展构造的形成可能与西太平洋板块的后撤相关,即大规模伸展构造作用引发了华北克拉通东部的地壳减薄作用。  相似文献   

甘肃白银厂铜多金属矿田重磁异常及构造特征北大核心CSCD     

郭小刚 《地质与勘探》2022,58(5):1057-1069

甘肃白银厂铜多金属硫化物矿田是受陆缘弧环境火山机构及其同生断裂控制的典型火山岩赋矿块状硫化物矿床(VHMS)。为了进一步探讨该矿床重磁场特征及与构造和矿床的关系,通过对区内的重磁场异常数据进行位场分离、小波分析和基于张量数据的三维欧拉反褶积自动确定地质体位置和埋藏深度的定量反演计算。结果表明,研究区布格重力场具有西部高、东部低的特征,其磁场可划分为4个磁场区;局部异常按一定分布规律呈圆形或似圆形正负相间分布,不同尺度的重磁细节异常图在一定程度上反映出引起重磁异常的地质异常体具有一定的延深且分布稳定,而且这些地质异常体具有向深部复合的趋势。经位场分离后正负相间的剩余重磁异常分布范围和分布特征大致反映了白银厂奥陶纪中酸性火山岩建造构造为一个继承性的火山穹窿构造,东、西部不同的重磁异常特征说明东西部的火山喷发具有不同的基底、源区和喷发方式。发育NW向、NE向、近NS向、NEE向等4组断裂构造,近NS向断裂F3、F4、F5、F6、F7形成时间稍晚于NEE向断裂,其与NEE向断裂F1、F2共同形成了研究区棋盘网格状的构造分布特征,这两组断裂为研究区内主要的控岩、控矿断裂。火山机构的分布明显受断裂构造控制,火山口集中分布在深大断裂、大断裂或两组断裂的交汇处。矿田内各矿床及成矿有利地段均处于研究区中部低缓重磁异常场内正负磁异常变化的梯度带内。本次研究为控矿要素研究和开展找矿预测工作提供了丰富、翔实的地球物理资料。  相似文献   

青藏高原南部及邻区深部碳释放规模与成因     

赵文斌  郭正府  李菊景  马琳  刘嘉麒 《岩石学报》2022,38(5):1541-1556

不同构造背景下的深部碳释放通量与机制研究对于深刻理解长时间尺度的气候变化具有重要意义,以往的相关研究多集中在洋中脊、大洋俯冲带和大陆裂谷等地质单元,缺少对大陆碰撞带深部碳释放规模与机理的关注,从而制约了对大陆碰撞带深部碳循环过程及其气候环境效应的进一步认识。青藏高原起源于印度和欧亚大陆的碰撞,是研究大陆碰撞带深部碳循环的理想地区。为此,在近年来青藏高原温室气体释放野外观测与研究的基础上,本文估算了高原南部及邻区火山-地热区的CO₂释放规模并探讨了其释放模式。气体He-C同位素地球化学与温泉水热活动特征等显示,青藏高原南部及邻区的深部碳释放主要受深部岩浆房、断裂和浅部水热系统等因素的控制。依据深部流体源区和上升运移控制因素的差异,可以将青藏高原南部及邻区的深部碳释放划分为三大类：(1)以壳内水热系统脱碳为主的藏南地区;(2)深大断裂控制的以水热系统脱碳为主的川西地区;(3)深部岩浆房和浅部水热系统共同控制的滇西南地区。青藏高原南部土壤微渗漏CO₂释放通量介于18.7～52.3Mt/yr之间,温泉溶解无机碳释放通量约为0.13Mt/yr;高原邻区...  相似文献   

俯冲带硫的地球化学行为及硫循环SCIEI北大核心CSCD     

李继磊  高俊  黄高风  马智佩  王信水 《岩石学报》2022,38(5):1345-1359

俯冲带是全球最大的物质循环系统,控制着硫(S)在地球内部圈层及表层的循环,影响着大气圈、水圈、生物圈、岩石圈的稳定性以及地球的宜居性。厘清S在俯冲带中的地球化学行为和循环特征对理解地球各储库的氧化还原状态、岩浆作用与演化、成矿物质聚集、以及地球大气成分等具有重要意义。本文首先总结了进入俯冲带之前的大洋岩石圈的S结构模型,对S在大洋板片中的分布状态和地球化学特征进行了系统归纳。随后,系统阐述了俯冲带高压-超高压变质岩记录的板片变质及脱水过程中硫的地球化学行为。岩石学研究表明俯冲板片中的S多以硫化物相存在,硫酸盐矿物在弧前深度就已被释放或分解。相较于熔体,俯冲带流体中S的溶解度更高,是运移硫的更有效方式。DEW模型计算结果显示,流体中S含量总体较低,但在俯冲板片~90km处其含量有一个峰值(浓度0.5%~1.0%)。岩相学证据、地球化学测试结果、磷灰石S近边吸收结构(S-XANES)特征以及模拟结果都显示俯冲深部流体中S多以HS^(-)及H_(2)S形式存在,不含大量的SO_(4)^(2-)及硫酸盐;中f_(S_(2))流体有利于S迁移出俯冲板片,从而促进俯冲带大规模S循环,而高f_(S_(2))流体在流-岩交换过程沿流体通道发生S的锁固作用而不利于俯冲带S循环。质量平衡计算显示全球俯冲带S输入通量为4.65×10^(13)g/yr,弧下深度板片S输出通量为2.91×10^(12)g/yr,板片-岛弧S循环效率仅6.3%。俯冲板片在弧下深度可能存在一个短暂高效的S释放窗口,释放流体的δ^(34)S值为-2.1±3.0‰。基于高压-超高压变质岩中硫化物的研究,初步厘清了俯冲板片中S的地球化学行为,首次从板片角度全面、定量地限定了俯冲带的脱硫通量、效率、种型和同位素特征,提出俯冲带循环的S不是岛弧岩浆的氧化剂,与岛弧环境的正δ^(34)S值也无直接因果联系,对解析俯冲带S循环和理解地球长期的S循环具有重要意义。最后,本文还展望了俯冲带S循环的未来发展方向,应在俯冲带流体氧化还原性质(硫酸盐的命运)、俯冲沉积物对S循环的制约、俯冲带环境下多硫同位素的分馏效应、S循环与其它挥发分(如C等)循环之间的耦合关系、地球历史上深部S循环等方向做出探索,更深入地理解俯冲带及全球S循环过程。  相似文献   

新生代阿尔金断裂带的演化:来自沿线盆地沉积记录的启示SCIEI北大核心CSCD     

谢皓  刘彩彩  张会平  詹艳  赵旭东 《岩石学报》2022,38(4):1107-1125

阿尔金断裂带是青藏高原自印度与欧亚大陆碰撞后向北扩展的前缘断裂,其新生代活动性对于研究青藏高原隆升与扩展过程和机制具有重要意义。近些年,运用热年代学、断裂几何学和运动学、沉积学、磁性地层学和地震学等方法对阿尔金断裂带的性质、组成结构、断裂活动时代、走滑断裂运动特征、走滑位移量和走滑速率等进行了细致的研究,而对阿尔金断裂带沿线受其控制的新生代沉积盆地的地层年代、沉积演化特征虽然也有一定研究,但往往仅限于单个盆地,缺乏对沿线盆地整体的对比认识,造成对阿尔金断裂带走滑起始时间及阿尔金山的隆升历史存在不同的认识。本文对近二十年来阿尔金断裂带沿线新生代沉积盆地的磁性地层年代与沉积相演化的研究进展进行综述,建立阿尔金断裂带沿线盆地新生代沉积序列和年代框架;辅助热年代学等资料,提出阿尔金断裂带的三阶段演化模型:始新世-中中新世,阿尔金断裂带以大幅度的走滑运动为主,同时伴随着阿尔金山小范围的隆升;中中新世开始,阿尔金山开始大规模的隆升,伴随着较少量的走滑运动;晚中新世以来,阿尔金断裂带构造活动加强。  相似文献